17
HOW TO USE THE NETWORK SCANNER FUNCTION
2
(13) [FORMAT] key (
)
When you send an image to one or more
recipients using Scan to E-mail or Scan to FTP,
the [FORMAT] key enables you to temporarily
override the individual file format settings (file
type / compression mode) stored for each
recipient and send the image to all of the
recipients using a single file format setting.
(14) [ORIGINAL SIZE] key (
)
This is used to set the size of the original to be
transmitted.
(15) [DUPLEX SCAN] key (
)
Press this key to use the duplex scan function.
(when the RSPF is installed)
(16) Arrow
keys
(
)
These are used to select items and move through
pages.
(17) [CA] key
This is used to cancel a transmission or
programming operation. When pressed during a
programming operation, the operation is canceled
and the display returns to the base screen
described on
.
This key is also used to cancel a resolution, paper
size, or special function setting that was selected
at the time of transmission.
(18) [START] key (
)
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When configuring and storing settings
ABC
DEF
JKL
GHI
MNO
TUV
PQRS
WXYZ
@.-_
READ-END
ACC. #-C
BACK
OK
INTERRUPT
ZOOM
ADDRESS
ADDRESS
DUPLEX SCAN
DUPLEX SCAN
DUPLEX
PAPER
RESOLUTION
RESOLUTION
AUTO%
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
(2)
(3)
(4)
(5)
(11)
(12)
(13)
(14)
(15)
(16)
(18)
(17)
(6)
• When the auto power shut-off function is
activated, all indicators except the
[START] key indicator go off. For
information on auto power shut-off, see
the "Operation manual (for general
information and copier)".
• For information on the keys and indicators
which are used for the copy function and
other functions, see "OPERATION
PANEL" in the manual for each function.
Note