MX-M753N MX-FXX2 9 – 2
C. Attach the FAX memory.
D. Attach the interface cable.
1)
Pass the interface cable through the hole of the sheet metal of
the control PWB, connect it to the control PWB.
[Note] Check that the connector is not obliquely inserted.
2)
Fix a snap band with the bundled M3 screw.
E. Attach the control PWB
1)
Push the control PWB unit into the main unit and secure it with
the four screws.
F. Attach the fax box unit to the rear part of the
main unit.
1)
Remove the screw from the rear cabinet of the main unit.
2)
Insert the step screw into the mounting hole of the fax box unit.
3)
Use a screw that has been removed to secure the fax box unit.
G. Attach the right cabinet upper.
1)
Cut out the cut-out portion of the right cabinet upper.
2)
Fit the interface cable into the opening that has been cut.
3)
Attach the right cabinet upper to the main unit.
4)
Secure the right cabinet upper with the three screws.
PROG1
PROG2
PS KANJI
FAX IMG EXT
PCL/BARCODE
