MX-M753N MX-FN15/FN16 5 – 5
6)
Install the connection plate to the main unit with the fixing
screws I (2 pcs.).
C. Plate and connection plate installation
1)
Install the plate to the finisher as shown in the figure, and fix it
with the fixing screw G (1 pc).
2)
Install the rail and the finisher with two screws G (M4 x 6).
D. Caster adjustment
1)
Bring the finisher closer to the main unit and check that the
guide pin of the main unit enters into the connection hole in the
finisher smoothly.
2)
At that time, check that the center of the guide pin is in the cen-
ter of the scale marked on the side of the connection hole, and
the pin direction coincides with the hole direction.
3)
If the guide pin is not in the center, or if the guide pin does not
enter smoothly, adjust as follows.
4)
Remove the fixing screw of base cover (2 positions) in the front
and the back of the finisher, and remove the base cover.
5)
Remove the fixing screws (2 pcs.) of the rear cover on the rear
of the finisher, and remove the rear cover.
6)
Only for the AR-F15, remove the front cabinet lower fixing
screws (2 pcs.).
7)
Open the front cabinet upper, and open the front cabinet lower.
