MX-M753N MX-CF10 4 – 9
3)
Use the spanner and adjust the height adjustment bolt so that
the height of the rear side cabinet top surface is of the same
height.
4)
Tighten the adjustment section fixing screws (2 pcs.).
5)
Install the base cover.
L. Check the clearance between the main unit
and the inserter
1)
Push the inserter into the main unit.
2)
Check the upper and the lower clearances between the main
unit and the inserter cabinet.
(1) When the upper and the lower clearances differ
1)
Open the front upper door of the finisher, and remove the
spanner (fixed with a screw) from the inside of the door.
2)
Remove the base cover (fixed with a screw in the front and a
screw at the back) fixed to the front and the rear of the finisher
base section.
3)
Loosen the front side and the rear side adjustment section fix-
ing screws (2 pcs. for each side).
MX-FN15/FN16
MX-FN14
