Sharp MX-M350 Service Manual Download Page 276

Page: 276 / 276

COPYRIGHT

2007 BY SHARP CORPORATION

Printed in Japan.

No part of this publication may be reproduced,

stored in a retrieval system, or transmitted,

in any form or by any means,

electronic; mechanical; photocopying; recording or otherwise

without prior written permission of the publisher.

Trademark acknowledgements

• Microsoft

, Windows

98, Windows

Me, Windows NT

4.0,

Windows

2000, Windows

XP, Windows

Vista, Windows

Server 2003 and

Internet Explorer

are registered trademarks or trademarks of

Microsoft Corporation in the U.S.A. and other countries.

• PostScript is a registered trademark of Adobe Systems Incorporated.

• Macintosh, Mac OS, AppleTalk, EtherTalk, LaserWriter, and Safari are registered

trademarks or trademarks of Apple Computer, Inc.

• IBM, PC/AT, and PowerPC are trademarks of International Business Machines

Corporation.

• Acrobat

Reader Copyright

1987- 2002 Adobe Systems Incorporated. All rights

reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of
Adobe Systems Incorporated.

• PCL is a registered trademark of the Hewlett-Packard Company.

• Sharpdesk is a trademark of Sharp Corporation.

• All other trademarks and copyrights are the property of their respective owners.

SHARP CORPORATION
Digital Document System Group
CS Promotion Center
Yamatokoriyama, Nara 639-1186, Japan

2007 February Printed in Japan

Summary of Contents for MX-M350





















































































































































































































































































Search results

Summary of Contents for MX-M350

Reviews:

Sharp MX-M350, Service Manual, Page: 276 / 276

Search results

Summary of Contents for MX-M350

Reviews: