Sharp MX-C407F User Manual Download Page 28

Page: 28 / 200

Notes:

•

If you insert the flash drive when an error message appears, then the printer ignores the flash drive.

•

If you insert the flash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

From the display, touch the document that you want to print.
If necessary, configure other print settings.

Send the print job.
To print another document, touch USB Drive.

Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the flash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Supported flash drives and file types

Flash drives

Notes:

–

The printer supports high

‑

speed USB flash drives with full

‑

speed standard.

–

USB flash drives must support the File Allocation Table (FAT) system.

Many flash drives are tested and approved for use with the printer. For more information, contact the place

where you purchased the printer.

File types

Documents:

•

.doc or .docx

•

.xls or .xlsx

•

.ppt or .pptx

Printing

Summary of Contents for MX-C407F









































































































































































































Search results

Summary of Contents for MX-C407F

Reviews:

Sharp MX-C407F, User Manual, Page: 28 / 200

Search results

Summary of Contents for MX-C407F

Reviews: