manualshive.com logo in svg

Sharp MX-C407F, User Manual, Page: 123 / 200

Share
Download
Sharp MX-C407F User Manual Download Page 123

Maintaining the printer

Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and 

supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume

1

From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback

2

Adjust the volume.

Notes:

•

If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer

performance.

•

The volume resets to the default value after the session is logged out or when the printer wakes from

Sleep or Hibernate mode.

Configuring the fax speaker settings

1

From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.

2

Do the following:

•

Set the Speaker Mode to Always On.

•

Set the Speaker Volume to High.

•

Activate the Ringer Volume.

Networking

Connecting the printer to a Wi

‑

Fi network

1

From the home screen, navigate to:
Settings > Network/Ports > Wireless

2

Select Setup On Printer Panel and then follow the instructions on the display.

Note: For Wi

‑

Fi

‑

network

‑

ready printer models, a prompt for Wi

‑

Fi network setup appears during initial 

setup.

 

Maintaining the printer

123

Summary of Contents for MX-C407F









































































































































































































Reviews:

No comments