Sharp MX-B402, Operation Manual, Page: 97 / 822

1-56
BEFORE USING THE MACHINE
Contents
2
Release the used toner collection
container.
(1) Make sure that the part indicated in the
illustration has stopped in the correct
position.
After machine operation stops suddenly due to a power
outage or other reason, the part will stop in the correct
position unless an attempt was made to remove the toner
collection container.
If the part has not stopped in the correct position, close
the front cover, turn on the power, and then follow the
correct procedure to turn off the power. After the power
has been turned off correctly, start again from step 1.
(2) Turn the toner collection container lock
lever to the right until it is horizontal.
(3) Tip the toner collection container forward.
Grasp the top right of the toner collection container with
your right hand and support the bottom left with your left
hand, and slowly tip the container toward you.
3
Remove the toner collection container.
• If the toner collection container is tipped forward too far, it will not be possible to remove it.
• Do not point the holes down as used toner will spill out.
• Hold the container by both hands and lift it up slowly.
• Do not discard the toner collection container. Place it in a plastic bag and keep it until your service technician comes
to perform maintenance. Your service technician will collect the toner collection container.
Correct
position
Incorrect
position