Sharp MX-B402, Operation Manual, Page: 531 / 822

5-58
SCANNER/INTERNET FAX
Contents
3
MX-B402:
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
MX-B402SC:
Specify the scan size.
(1) Touch the original output destination.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum width that can be scanned is 19-5/8" (500 mm) (the maximum height is 8-1/2" (216 mm)).
• To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size.
MX-B402-SC Only
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 2 7/8" (74 mm) or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 4 1/8" (105 mm) or
less
• When "Card Size" is selected, you cannot copy if the original guide is set to 2 7/8" (74 mm) or higher.
4
Touch the [OK] key.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan
destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2.
8½x11 8½x14
Scan/Original
8½x13 Long Size
OK
Inch
AB
Size Input
8½x13 5½x8½
(2) (1)
8½x11
8½x14
Scan/Original
8½x13 Long Size
OK
Inch
AB
Size Input
8½x13
5½x8½
Upper Exit
Check Size
Heavy Exit
Card Size
Original Exit
Place
Original Size
(3)
(2)
(1)
Scan/Original
OK
Auto 5½x 8 ½
Scan Size
2-Sided
Tablet 2-Sided
Booklet
Send Size 100%
Image Orientation