Sharp MX-B402 Operation Manual Download Page 569

Page: 569 / 822

5-96

SCANNER/INTERNET FAX

Contents

Select drop out color mode.

(1) Touch [Drop Out Color] key so that it is

highlighted.

(2) Touch the [OK] key.

Pless the [START] key.

Scanning begins.

• If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep wiil sound to indicate that scanning is finished.

• If you are scanning finishes, place the next original and press the [START] key.

Repeat until all pages have been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.

To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

To cancel the Drop Out Color fuction....

Touch the [Drop Out Color] key in the screen of step 4 so that it is not highlighted.

Scan/Special Modes

Card Shot

Slow Scan

Mode

Quick File

Erase

Job

Build

File

Suppress

Background

Blank Page

Skip

Slow Scan

Mode

Program

Timer

Original

Count

Drop Out

Color

(2)

(1)

Summary of Contents for MX-B402























































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-B402, Operation Manual, Page: 569 / 822

Search results

Summary of Contents for MX-B402

Reviews: