Sharp MX-B402, Operation Manual, Page: 696 / 822

7-40
SYSTEM SETTINGS
Contents
Network Settings
Printer Settings
Item Factory default setting Page
■
Network Settings
7-75
●
IPv4 Settings DHCP 7-75
●
IPv6 Settings Disabled 7-75
●
Enable TCP/IP Enabled 7-75
●
Enable NetWare Enabled 7-75
●
Enable EtherTalk Enabled 7-75
●
Enable NetBEUI Enabled 7-75
●
Reset the NIC – 7-75
●
Ping Command – 7-75
Item Factory default setting Page
■
Printer Settings
7-76
●
Default Settings 7-76
X
Prohibit Notice Page Printing Enabled 7-76
X
Prohibit Test Page Printing Disabled 7-76
X
A4/Letter Size Auto Change Disabled 7-76
X
Print Density Level 3 7-76
X
Bypass Tray Settings 7-76
‹
Enable Detected Paper Size in Bypass Tray Disabled 7-76
‹
Enable Selected Paper Type in Bypass Tray Enabled 7-76
‹
Exclude Bypass-Tray from Auto Paper Select Disabled 7-76
X
Job Spool Queuing Enabled 7-76
●
Interface Settings 7-77
X
Hexadecimal Dump Mode Disabled 7-77
X
I/O Timeout 60 sec. 7-77
X
Enable USB Port Enabled 7-77
X
USB Port Emulation Switching Auto 7-77
X
Enable Network Port Enabled 7-77
X
Network Port Emulation Switching Auto 7-77
X
Port Switching Method Switch at End of Job 7-77