MX-B381/B401 MX-FR16U (DATA SECURITY KIT) 6 – 4
5)
After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)
Display of firmware install (Update) process
* The abbreviated name of the firmware which is currently
installed (updated) is displayed sequentially.
* The screen may flash instantaneously during the install
(update) process. This is a normal operation.
6)
Check the result of install (update) of the firmware.
Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.
Display of firmware update results
OK: Update success
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
7)
Turn OFF the power to terminate the boot mode.
8)
Use SIM22-05 to check to confirm that the DSK firmware has
been installed.
F. Preparation for validating the DSK
1)
To validate the DSK, enter the product key by the key opera-
tion on the machine.
a)
Press the [SYSTEM SETTINGS] key on the operation
panel.
b)
Enter page 2/2 of the system setting, and touch [Product
key input] key.
c)
Touch [Data security kit] key.
d)
Enter the product key with numeric key (10-key), and
touch [Registration] key.
2)
When inputting the product key is completed, check to confirm
that "Turn on the power again" is displayed, and turn OFF the
power switch and the main power switch, and then turn ON
them again.
Firm
U
pdate
Icu
M
Firm
U
pdat
Icu
M
Firm
U
pdat
Icu
M
Firm
U
pdat
Icu
M