MX-B381/B401 MX-FXX3 (FACSIMILE EXPANSION KIT) 4 – 3
2)
Cut off the notch section of the rear cabinet. Attach the I/F
cable to the rear cabinet and the frame, and fix the banding
band with the screw (M3) (included in the package).
3)
Attach the controller cover, and fix it with the screw.
4)
Attach the left cabinet by using care for the hook, and fix the
stopper.
5)
Close the front cover and the tray 1.
E. Turn on the power of the main unit
1)
Insert the power plug into the power outlet.
2)
Turn ON the power switch.
3)
Turn ON the power switch on the operation panel.
F. Set the destination and the logo type.
1)
Switch the operation panel to the copy mode and use the key
operation [P], [
], [C], and [
] to enter the simulation mode.
2)
Use the numeric keys to enter [26] in the main code entry
screen shown below and press the [START] key.
SIMULATION
INPUT A MAIN NUM BY 10-KEY, AND PRESS START
01: SCANNER CHECK
02: SPF CHECK
03: AFTER PROCESS CHECK
04: DESK/LCC CHECK
05: PANEL/LAMP CHECK
06: MFP CHECK
07: AGING
T
ES
T
1/9
CLOSE
26
