Sharp MX 3070, Troubleshooting Manual

Page: 40 / 56

40
Fax
THE MACHINE DOES NOT BEGIN FAX
RECEPTION
Check Solution
Has the reception mode been set to
[Manual Reception] in the setting
mode? ■ Set the reception mode to [Auto Reception].
When the reception mode is set to [Manual Reception], the machine will not
receive faxes automatically.

"Setting mode (administrator)" → [System Settings] → [Image Send Settings]
→ [Fax Data Receive/Forward (Manual)] → [Fax Settings] → [Receive Settings]
When [Switching from Manual to Automatic Reception] is selected in setting
mode and a fax is received in manual reception mode, the machine will
automatically switch to automatic reception after the specified number of rings
and receive the fax.
Ask your administrator to enable this setting.

"Setting mode (administrator)" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Receive Settings] → [Switching from Manual to Automatic
Reception] → [Switching to Automatic Reception] →
Is little free memory remaining?
■
Increase the amount of free memory.
• The memory contains data that has been received with the received image
check setting enabled.
• The memory contains data that has been received with confidential reception
or that is protected by a password.
• A fax is stored in the memory box.
DIALING IS NOT POSSIBLE
Check Solution
Is the extension telephone
connected? ■ Check the connections.
Check the telephone line jack, the wall jack, and any extension adapters to make
sure that all connections are secure.
Is the external telephone enabled in
setting mode?
(When an external telephone is
connected)
■
Ask your administrator to enable [External Telephone Setting]/

"Setting mode (administrator)" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Default Settings] → [External Telephone Setting] →
Is the line busy? ■ Wait until the communication is completed.
?
!
?
!