Sharp MX-3051 Troubleshooting Manual Download Page 8

Page: 8 / 67

General Problems

THE PAPER MISFEEDS

Is a torn piece of paper remaining in the machine?

Is too much paper loaded in the tray?

Are multiple sheets feeding at once?

Are you using paper that is not within the specifications?

Are the bypass tray guides adjusted to the width of the paper?

Is the bypass tray extension guide pulled out?

Is the bypass feed roller dirty?

Is A5 (5-1/2" x 8-1/2") size paper loaded?

Is the paper size specified?

Did you add paper to the bypass tray?

Are you using punched paper?

Are you using label sheets that cannot be used?

Remove the paper, turn it over, and reload it. Using a different paper

type may solve the problem.

Did you load an envelope?

PAPER DOES NOT FEED FROM

THE PAPER TRAY

Is the paper loaded correctly into the paper tray?

Has the tray been prohibited in some modes (copy, print, fax, image

send, document filing)?

I DON'T KNOW HOW TO CHANGE

THE PAPER SIZE

Set the paper size used in each tray in the tray settings.

THE OUTPUT IS NOTICEABLY

CURLED AND UNEVEN

Remove the paper, turn it over, and reload it. Using a different paper

type may solve the problem.

THE IMAGE IS SKEWED ON THE

PAPER

Is too much paper loaded into the bypass tray?

Are the bypass tray guides adjusted to the width of the paper?

Are the original guides adjusted to the width of the paper?

Is the control plate auxiliary block attached to the tray? (When using

SRA3)

Are you scanning originals of mixed width? (In a reversing single pass

feeder (RSPF))

LINES APPEAR IN THE IMAGE

Are the scanning areas of the document glass or automatic document

feeder dirty?

Is the bypass feed roller dirty?

Did you clean the main charger of the photoconductive drum?

Did you clean the PT charger of the primary transfer belt?

Did you clean the laser unit?

Did you execute Black Streak Reduction of system setting?

SMUDGES APPEAR ON PRINTED

OUTPUT

Are you using paper that is not within the specifications?

Are you printing on pre-punched paper?

Does a message appear indicating the need for maintenance?

Remove the paper, turn it over, and reload it. Using a different paper

type may solve the problem.

WHEN PRINTING ON THICK PAPER,

THE PRINT RESULT IS DIRTY FROM

THE 2ND PAGE ON

Has the paper type been set correctly?

I DON'T KNOW HOW TO CHANGE

THE OUTPUT TRAY

Did you change the output tray?

PART OF THE IMAGE IS CUT OFF

Has the correct paper size been set?

Was the original placed in the correct position?

PRINTING TAKES PLACE ON THE

WRONG SIDE OF THE PAPER

Is the paper loaded with the print side facing in the correct direction?

A COVER OR INSERT IS NOT

PRINTED ON THE SPECIFIED

PAPER

Has the paper type been set correctly?

Problem

Check

Page

Summary of Contents for MX-3051




































































Search results

Summary of Contents for MX-3051

Reviews:

Sharp MX-3051, Troubleshooting Manual, Page: 8 / 67

Search results

Summary of Contents for MX-3051

Reviews: