Sharp MX-3051, Troubleshooting Manual, Page: 46 / 67

46
Fax Problems
NOTIFICATION SOUNDS ARE TOO LOUD OR
TOO SOFT, OR ARE NOT AUDIBLE (VOLUME
ADJUSTMENT)
Check Solution
Have you adjusted the volume in the
speaker settings of setting mode? ■ Adjust the on-hook volume, ringing volume, line monitor volume, send/receive
completion volume, and send/receive error volume in "Settings (administrator)".

"Settings (administrator)" → [System Settings] → [Common Settings] →
[Sound Settings] → [Beep Sound Settings (Image Send)]
You can adjust the volume of the
original scan complete sound in the
scan complete sound setting of
setting mode.
■
A complete sound is heard when scanning of the original is completed. In
"Settings (administrator)", select [System Settings]
→ [Common Settings] →
[Sound Settings] → [Beep Sound Settings (Common)] → [Scan Complete Sound
(Image Send) (Common)] to adjust the volume.
I DON'T KNOW HOW TO STORE OR PRINT
SENDER INFORMATION
Check Solution
You can store sender information in
"Own Name and Destination Set" in
setting mode. ■ To store sender information, select "Settings (administrator)]
- [System Settings] → [Image Send Settings] → [Common Settings]
→ [Own Name and Destination Set].
BROADCAST TRANSMISSION DOES NOT WORK
Check Solution
Has broadcast setting been disabled
in the setting mode (administrator)?
■
Broadcast transmission cannot be performed when "Settings (administrator)" -
[System Settings]
→ [Image Send Settings] → [Fax Settings] → [Send Setting]
→ [Disable Fax Broadcasting] is disabled.
?
!
?
!
?
!