Sharp MX-3051, Troubleshooting Manual

Page: 41 / 67

41
Fax Problems
TRANSMISSION DOES NOT BEGIN AT THE
SPECIFIED TIME
Check Solution
Is the machine's clock set to the
correct time? ■ Set the clock to the correct time.

"Settings" → [System Settings] → [Common Settings] → [Device Control]
→ [Clock]
Is a transmission in progress?
■
If another transmission is in progress when the specified time arrives, the timer
operation will begin after that transmission is finished.
PRINTING DOES NOT TAKE PLACE AFTER
RECEPTION
Check Solution
Does a password entry screen
appear? ■ Enter the correct password using the numeric keys.
[Hold Setting for Received Data Print] is enabled. If you do not know the
password, check with your administrator.

"Settings (administrator)" → [System Settings] → [Image Send Settings] →
[Common Settings] → [Condition Settings]
→ [Hold Setting for Received Data Print]
Has cut-off printing been disabled in
the setting mode (administrator)?
■
Load the same size of paper as the received fax.
If [Print Actual Size Cut off Disabled] is enabled in [Print Style Setting] in the
setting mode (administrator) and a fax is received that is larger than any paper
that is loaded, the fax will be received and stored in memory without being
printed. (However, when a fax longer than A3 (11" x 17") size is received, it will
be printed using multiple sheets of paper.)

"Settings" → [System Settings] → [Image Send Settings] → [Fax Settings] →
[Receive Settings] → [Print Style Setting]
Is forwarding (Inbound Routing
function) enabled for a received fax? ■ If you need to print a received fax, ask your administrator.
When the Inbound Routing function is enabled, received faxes are automatically
forwarded to a specified address. If [Print at Error] is selected when Inbound
Routing is enabled, received faxes will only be printed when an error occurs.

"Settings (administrator)" → [Image Send Settings]
→ [Inbound Routing (Forwarding/Storing) Settings] → [Administration Settings]
→ [Inbound Routing Settings]
Is the paper other than the size that
can be printed by fax reception
loaded?
■
If the paper other than the size with A5, A5R, B5, B5R, A4, A4R, B4, A3,
8-1/2"x11", 8-1/2"x11"R, 8-1/2"x13", 8-1/2"x13-2/5", 8-1/2"x13-1/2"
(5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, A4, A4, 8-1/2"x13", 8-1/2"x13-2/5",
8-1/2"x14", 11"x17") is loaded in the machine, printing does not take place even if
a fax is received. Load the papers of the above size.
?
!
?
!