manualshive.com logo in svg

Sharp MX-3051, Troubleshooting Manual, Page: 17 / 67

Share
Download
Sharp MX-3051 Troubleshooting Manual Download Page 17

17

General Problems

LINES APPEAR IN THE IMAGE

Check

Solution

Are the scanning areas of the 
document glass or automatic 
document feeder dirty?

■

Clean the scanning areas of the document glass or automatic document feeder.

►

Maintenance (page 6)

Is the bypass feed roller dirty?

■

Clean the surface of the bypass feed roller.

►

Maintenance (page 6)

Did you clean the main charger of the 
photoconductive drum?

■

Clean the main charger of the photoconductive drum. For details on cleaning, 
refer to the User's Manual.

Did you clean the PT charger of the 
primary transfer belt?

■

Clean the PT charger of the primary transfer belt. For details on cleaning, refer to 
the User's Manual.

Did you clean the laser unit?

■

Clean the laser unit. For details on cleaning, refer to the User's Manual.

Did you execute Black Streak 
Reduction of system setting?

■

Execute in "Settings (administrator)" 

→

 [System Settings] 

→

 [Image Quality 

Adjustment] 

→

 [Collective Adjustment] 

→

 [Black Streak Reduction]. To detect 

black streaks, enable [Display warning message for black streaks detection.]. For 
more information on the setting, refer to the User's Manual.

SMUDGES APPEAR ON PRINTED OUTPUT

Check

Solution

Are you using paper that is not within 
the specifications?

■

Use SHARP-recommended paper.

 

Using paper that is for other models or special paper that is not supported may 
result in misfeeds, creases, or smudges.

- "SUPPLIES" in Start Guide

Are you printing on pre-punched 
paper?

■

Take care that the image does not overlap the punch holes.

 

If the printed image overlaps the punch holes, smudges may appear on the 
reverse side of the paper following 1-sided printing, or on both sides following 
2-sided printing.

Does a message appear indicating the 
need for maintenance?

■

Contact your dealer or nearest SHARP Service Department as soon as possible.

Remove the paper, turn it over, and 
reload it. Using a different paper type 
may solve the problem. 

■

This may improve some states of paper curling.

►

Placing the original and adding paper (page 5)

?

!

?

!

Summary of Contents for MX-3051




































































Reviews:

No comments