Sharp MX-2616N Operation Manual Download Page 441

Page: 441 / 832

4-96

FACSIMILE

Contents

Press the [BLACK & WHITE START] key.

Scanning begins. A beep will sound to indicate that scanning is finished.

To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

• When two-sided originals are used, the front of each original is stamped twice.

• If an error occurs during scanning, an original that was not scanned may be stamped.

• When the "O" mark that is stamped on originals starts to become faint, replace the stamp cartridge. For the procedure for

replacing the stamp cartridge, see "

REPLACING THE STAMP CARTRIDGE

" (page 1-66) in "1. BEFORE USING THE

MACHINE".

To cancel the stamp function...

Touch the [Verif. Stamp] key in the screen of step 3 so that it is no longer highlighted.

System Settings (Administrator): Default Verification Stamp

This setting is used to always have originals stamped.

Summary of Contents for MX-2616N

































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2616N

Reviews:

Sharp MX-2616N, Operation Manual, Page: 441 / 832

Search results

Summary of Contents for MX-2616N

Reviews: