MX-3610N ADJUSTMENTS AND SETTINGS 4 – 65
10-D
(18)
Watermark adjustment
(Normally not required)
(26cpm/36cpm/31cpm(A) machine)
General (Purpose):
This adjustment is used to adjust the reproduction capability of the
watermark in the copy/printer mode.
This adjustment is used for watermark documents (primary output).
The result of this adjustment affects the result of watermark print
(secondary output).
In the printer mode, the watermark density can be adjusted by the
printer driver. That adjustment is based on the result of this adjust-
ment.
This adjustment must be performed in the following cases:
* When there is request from the user. (When a satisfactory result
is not obtained from the adjustment in the system setting mode.)
* When there is request from the user. (When a satisfactory result
is not obtained from the adjustment with the printer driver.)
1)
Enter the SIM 46-66 mode.
2)
Select the PATTERN mode, then select an adjustment item in
the following list according to the situation.
Normally there is no need to adjust the PATTERN mode (items
K and L), the COPY MODE, and the POSITION mode.
Item/Display
Content
Setting
range
Default
value
Description
NOTE
A
WOVEN DEN BK LOW
Watermark density level (Color:
Black / Adjustment for light images)
0 - 255
15
The adjustment value is changed to increase or
decrease the density of the watermark of
background documents (primary output).
To increase the watermark density, increase the
adjustment value.
To decrease the watermark density, decrease the
adjustment value.
When the adjustment value is increased, the
watermark area which is originally not reproduced
becomes difficult to disappear.
When the adjustment value is decreased, the
watermark area which is originally reproduced
becomes easy to disappear.
B
WOVEN DEN BK MIDDLE
Watermark density level (Color:
Black, Density: Standard)
0 - 255
19
C
WOVEN DEN BK HIGH
Watermark density level (Color:
Black, Density: Dark)
0 - 255
23
D
WOVEN DEN C LOW
Watermark density level (Color:
Cyan / Adjustment for light images)
0 - 255
19
E
WOVEN DEN C MIDDLE
Watermark density level (Color:
Cyan, Density: Standard)
0 - 255
23
F
WOVEN DEN C HIGH
Watermark density level (Color:
Cyan, Density: Dark)
0 - 255
27
G
WOVEN DEN M LOW
Watermark density level (Color:
Magenta / Adjustment for light
images)
0 - 255
15
H
WOVEN DEN M MIDDLE
Watermark density level (Color:
Magenta, Density: Standard)
0 - 255
18
I
WOVEN DEN M HIGH
Watermark density level (Color:
Magenta, Density: Dark)
0 - 255
21
J
CONTRAST
Contrast adjustment
0 - 255
2
This is used to adjust the variation in the watermark
density when the adjustment value of the watermark
print/contrast adjustment in the system setting is
changed by 1.
When this value is increased, the variation is also
increased. When the value is decreased, the
variation is also decreased.
When the adjustment value is 0, the result of the
contrast adjustment is not reflected. (* The
adjustment value must be set to 1 or greater.)
K
HT TYPE (POSI)
For half-tone index watermark type
positive
42 - 43
42
To reproduce the containing characters of watermark
copy (secondary output) more clearly, set to 43.
In that case, however, the containing characters of
the watermark document (primary output) can be
easily reproduced.
Normally
set to the
default.
L
HT TYPE (NEGA)
For half-tone index watermark type
negative
42 - 43
42
To reproduce the containing characters of watermark
copy (secondary output) more clearly, set to 43.
In that case, however, the containing characters of
the watermark document (primary output) can be
easily reproduced.