manualshive.com logo in svg

Sharp MX-1800N, User Manual, Page: 5 / 61

Share
Download
Sharp MX-1800N User Manual Download Page 5

4

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

Reversing single pass feeder
(automatic document feeder)

This automatically feeds and scans multiple originals. 
Both sides of two-sided originals can be automatically 
scanned.

☞

PLACING THE ORIGINAL

 (page 31)

(2)

Front cover

Open this cover to switch the main power switch to "On" 
or "Off" or to replace a toner cartridge.

☞

TURNING THE POWER ON AND OFF

 (page 13)

☞

REPLACING THE TONER CARTRIDGES

 (page 52)

(3)

Operation panel

This is used to select functions and enter the number of 
copies.

☞

OPERATION PANEL

 (page 9)

(4)

Exit tray unit (right tray)*

When installed, output can be delivered to this tray.

(5)

Output tray (centre tray)

Copy jobs and print jobs are delivered to this tray.

(6)

Finisher*

This can be used to staple output. A punch module can 
also be installed to punch holes in output.

☞

FINISHER

 (page 37)

1

BEFORE USING THE MACHINE

(1)

(2)

(5)

(4)

(3)

(6)

When a finisher (peripheral 
devices) is not installed.

* Peripheral Devices

The peripheral devices are generally optional, however, some models include certain peripheral devices as standard 
equipment.

Summary of Contents for MX-1800N






























































Reviews:

No comments