manualshive.com logo in svg

Sharp MX-1800N, User Manual, Page: 2 / 61

Share
Download
Sharp MX-1800N User Manual Download Page 2

1

TABLE OF CONTENTS

ABOUT THIS MANUAL . . . . . . . . . . . . . . . . . . . . . . . . 2

• MANUALS PROVIDED WITH THE MACHINE . . . 2

1

BEFORE USING THE MACHINE

PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . 4

• EXTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

• INTERIOR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

• AUTOMATIC DOCUMENT FEEDER AND 

DOCUMENT GLASS  . . . . . . . . . . . . . . . . . . . . . . . 7

• CONNECTORS  . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• OPERATION PANEL . . . . . . . . . . . . . . . . . . . . . . . 9

TOUCH PANEL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PRINT/SEND STATUS (JOB STATUS) . . . . . . . . . . . 12

TURNING THE POWER ON AND OFF . . . . . . . . . . . 13

• ENERGY SAVE FUNCTIONS  . . . . . . . . . . . . . . . 14

• [POWER SAVE] KEY . . . . . . . . . . . . . . . . . . . . . . 14

USER AUTHENTICATION . . . . . . . . . . . . . . . . . . . . . 15

• AUTHENTICATION BY USER NUMBER. . . . . . . 15

• AUTHENTICATION BY LOGIN NAME / 

PASSWORD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2

LOADING PAPER

IMPORTANT POINTS ABOUT PAPER . . . . . . . . . . . 20

• NAMES AND LOCATIONS OF TRAYS . . . . . . . . 20

• THE MEANING OF "R" IN PAPER SIZES . . . . . . 21

• USEABLE PAPER  . . . . . . . . . . . . . . . . . . . . . . . . 21

TRAY SETTINGS FOR TRAYS 1 TO 4 . . . . . . . . . . . 23

• LOADING PAPER  . . . . . . . . . . . . . . . . . . . . . . . . 23

• CHANGING THE PAPER SIZE  . . . . . . . . . . . . . . 24

LOADING PAPER IN THE BYPASS TRAY . . . . . . . . 26

• IMPORTANT POINTS WHEN USING THE 

BYPASS TRAY. . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3

ORIGINALS

PLACING THE ORIGINAL . . . . . . . . . . . . . . . . . . . . . 31

• PLACING ORIGINALS IN THE AUTOMATIC 

DOCUMENT FEEDER . . . . . . . . . . . . . . . . . . . . . 31

• PLACING THE ORIGINAL ON THE 

DOCUMENT GLASS  . . . . . . . . . . . . . . . . . . . . . . 34

4

PERIPHERAL DEVICES

PERIPHERAL DEVICES  . . . . . . . . . . . . . . . . . . . . . . 36

FINISHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

• PART NAMES  . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

• SUPPLIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

• FINISHER MAINTENANCE . . . . . . . . . . . . . . . . . 38

SHARP OSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

• APPLICATION COMMUNICATION MODULE 

(MX-AMX2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

• EXTERNAL ACCOUNT MODULE (MX-AMX3) . . 44

5

MAINTENANCE

REGULAR MAINTENANCE . . . . . . . . . . . . . . . . . . . . 45

• CLEANING THE DOCUMENT GLASS AND 

AUTOMATIC DOCUMENT FEEDER . . . . . . . . . . 45

• CLEANING THE MAIN CHARGER OF THE 

PHOTOCONDUCTIVE DRUM . . . . . . . . . . . . . . . 47

• CLEANING THE BYPASS FEED ROLLER . . . . . 47

• CLEANING THE ORIGINAL FEED ROLLER . . . . 47

• CLEANING THE LASER UNIT . . . . . . . . . . . . . . . 48

REPLACING THE TONER CARTRIDGES. . . . . . . . . 52

REPLACING THE WASTE TONER BOX. . . . . . . . . . 55

6

ENTERING TEXT

FUNCTIONS OF THE MAIN KEYS  . . . . . . . . . . . . . . 58

• CHANGING THE ENTRY MODE . . . . . . . . . . . . . 59

• ENTERING TEXT FROM AN EXTERNAL 

KEYBOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Summary of Contents for MX-1800N






























































Reviews:

No comments