MD-X60H
– 34 –
EON summary no™tice for reference
1. EON-TI/PTY
EON stand-by can be set, only when EON ind. lights up.
While EON ind. goes out (NO EON STATION), EON stand-by can't be set.
If the EON button is pressed, then “NO EON” is indication the display.
2. EON-TI/PTY
Even if switch back ON
→
TN station continue to keep EON stand-by.
3. EON-TI
Don’t switch TN
→
ON during TN broadcast TA. (same item)
4. EON-TI/PTY
EON can be cancelled during receiving ON station by pressing EON button if necessary and
switch back ON
→
TN.
5. EON-TI/PTY
EON stand-by is perfectly cancelled (cleared) by pressing EON button 2 times during stand-by or powerOFF
or Tun Up/
Down or change band or recall pre-set CH.
6. EON-TI/PTY
After setting EON stand-by, stand-by items can be confirmed by pressing EON button one time.
7. EON-TI/PTY
EON button function:
•EON setting
•Confirm stand-by items
•Cancel (ON
→
TN)
•EON clear cancel (2 times)
8. EON-TI/PTY
After setting EON-TI and EON-PTY stand-by, if when EON data is not transmitted, EON ind goes out
and EON stand-by is automatically cancelled display “NO EON”.
9. EON-TI
EON-TI stand-by can't be set. When TP=0,TA=0(TN) even if EON ind. lights up and the EON
button is
pressed then “NO TI” is indication the display.
10. EON-PTY
Don’t switch TN
→
ON during TN broadcast same specified PTY. (same item of PTY)
11. EON-TI/PTY Switch TN
→
ON
→
TN station one cycle.
Never switch TN
→
ON1
→
ON2
→
Other net to other net station.
12. EON-TI/PTY After switch TN
→
ON station. When ON station is NO RDS, NO
signal, TA=OFF or different PTY
items.
The receiver switch back ON
→
TN displaying “NO READY”.
13.
During receive ON station. when ON station become to be NO RDS, NO signal, TA=ON to OFF or
different PTY item, The receiver switch back ON
→
TN.
14. EON-TI/PTY Switch TN
→
ON in case of 2 more stations exist, comparing field strength and switch to the
strongest
station, if these signals are same strength, switch to the first previous station.
If same frequency as AF'Sexists in the preset memory, then switch TN
→
ON (preset memory
station)
straight.
In case of exist 2 more preset memories of AF’S,
then switch to the preset CH which taken in
EON DATA
first, also in this case no concern to field strength.
15.
Even if switch TN
→
ON preset memory straight, that ON station is very weak signal, then search
another
AF'S (ON) station comparing field strength and switch to the strongest station as a result.
Of all atations
of AF'S are very weak or no good condition, then, switch back ON
→
TN
automatically display "NO
READY".
16. EON-TI/PTY No linkage volume, power ON/OFF, and switch function.
TP indicator
Not lit (OFF)
Not lit (OFF)
This programme does not carry traffic announcements nor does
it refer, via EON, to a programme that does.
Not lit (OFF)
Lit (ON)
This programmecarries EON information about another
programme which gives traffic information.
Lit (ON)
Not lit (OFF)
This programme carries traffic announcements but none are
being broadcast at present and may also carry EON information
about other traffic announcements.
Lit (ON)
Lit (ON)
A traffic announcement is being broadcast on this programme at
present.
About the TP and TA indicators
TA indicator
Meaning
