Sharp MD-R3 Operation Manual Download Page 8

Page: 8 / 48

(Continued)

■

Connecting the AC power cord

If you will not be using this unit for a prolonged period of
time, unplug the AC power cord from the AC outlet. Even
when the power is turned off, a small amount of current is
still consumed.

To an AC outlet
AC120V, 60 Hz

■

How to turn the power on or off

●

When the power is turned on, the display will change.

●

Press it again to turn the power off.

Press the

button.

POWER

CLOCK

To change the brightness of the display

Turn the power on and hold down the DISPLAY/CHARAC-
TER (DISPLAY) button for at least two seconds.

●

The "DIMMER ON" display will appear, and the display
will become dimmer.

To return to the original brightness, hold down the DIS-
PLAY/CHARACTER (DISPLAY) button for at least two sec-
onds.

●

The "DIMMER OFF" display will appear, and the original
brightness will be restored.

DISPLAY/CHARACTER

DISPLAY

DISPLAY/CHARACTER

DISPLAY

TOC

0dB

OVER

DISC TRACK DATE

MONO LP PRGM

RANDOM

TIMER REC

CLOCK

AM
PM

REMAIN

TOTAL

9 10 11 12 13

15 16 17 18 19 20

Area where track names and disc names
are displayed.
During playback it becomes a level meter.

Display related to re-
cording

D isp lay re la ted t o
playback

Are a whe re pla ying time,
track numbers and the time
are displayed

Display related to the timer

Indicators of the playback and recording operations Music calendar

Shows the number of
tracks recorded on an
MD and the number
of tracks on the CD.

■

How to read the display

Various messages, describing the operations and contents
of MiniDiscs are displayed in the display section.

Jog dial

REMAIN

9 10 11 12 13

15 16 17 18 19 20

REMAIN

9 10 11 12 13

15 16 17 18 19 20

Track
number

The track
number decreases.

The track
number increases.

■

Jog Dial

The jog dial on the main unit can be used to select track numbers (page 13) or to select characters (page 31).

●

When the jog dial is turned left or right it stops at 15˚
intervals, each click position represents one press of
t h e

button on the remote control. (Track

up/down)

●

When the dial is twisted harder, it has the same effect
as pushing the

button on the remote control

repeatedly. (Track up/down)

MD-R3

Summary of Contents for MD-R3

















































Search results

Summary of Contents for MD-R3

Reviews:

Related manuals for MD-R3

Brands by name

Popular brands

Sharp MD-R3, Operation Manual

Search results

Summary of Contents for MD-R3

Reviews:

Related manuals for MD-R3

Brands by name

Popular brands