background image

02/12/18     MD_MT290H_UK_2.fm

10

MD-MT290H

Po

wer

 So

ur

ce

-Us

ing with th

e

 AC A

d

a

p

to

r-

 

„

About charging time

After about 3.5 hours have passed, "

" will 

go out. The battery is charged up to 90% if it is 
completely discharged.

To charge the battery fully, continue charging for about 2

more hours. In this case, you do not need to press the

CHARGE button. Even if the CHARGE button is pressed,

"

" will not appear.

Notes:

z

Charge the battery within the range of 5°C - 35°C

(41°F - 95°F).

z

The unit can be left in the charging state after it is

completed.

Caution:

Using with the AC Adaptor

Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 5V socket.

Caution:

z

Insert the plugs firmly.

z

When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.

Notes:

z

If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electric-
ity resumes.

z

This unit can be used with the AC adaptor when the
rechargeable or an alkaline battery is in the unit.

z

Carry the battery in the supplied case.

z

Use the specified battery AD-N70BT only. Do not 

charge a battery (nickel-cadmium, alkaline, etc.) other 

than that specified.

z

Do not remove the outer cover of the re-

chargeable battery. It may cause heat gen-

eration, fire, or explosion.

z

Do not dip the battery in water, do not dis-

pose of it in a fire, and do not take it apart.

z

If the rechargeable battery terminal is dirty, charging 

may not start. In such a case, wipe off the dirt with a dry 

cloth.

z

Do not disassemble the battery.

To the DC IN 5V socket

AC 230V,
50/60 Hz

Summary of Contents for MD-MT290H





















































Reviews: