Sharp MD-MT290H Operation Manual Download Page 45

Page: 45 / 52

02/12/18 MD_MT290H_UK_6.fm

MD-MT290H

-E

r M

ess

A number or symbol appears in (*) position.

ERROR

MESSAGES

MEANING

NO SIGNAL

Poor connection of the digital cable.

No output signal comes out from the
connected unit.

(Use the AC power for the connected
unit.)

The input signal has improper sam-
pling frequency.

PLAY MD

You tried to record on a playback-
only disc.

POWER?

AC adaptor other than specified.

PROTECTED

The write protection tab of a MiniDisc
is set to the protected position.

SORRY

Since a track number is currently be-
ing located or updated, the unit can-
not accept your command.

(Wait a while and try the operation
again.)

ERROR

MESSAGES

MEANING

TEMP OVER

The temperature is too high.

(Turn off the power, and wait a while.)

TOC FORM
(**)

There is an error in the recording sig-
nal.

(Erase all of the tracks, and then record
again.)

TOC FULL

There is no space left for recording
character information (track names,
disc names, etc.).

Tr. Protect

The track has been protected from
being erased.

(Edit the track with the device on which
it was recorded.)

? DISC

A disc which contains data other
than music was played.

(A disc which contains nonmusic data
cannot be played.)

There is an error in the signal record-
ed on the disc.

Summary of Contents for MD-MT290H





















































Search results

Summary of Contents for MD-MT290H

Reviews:

Related manuals for MD-MT290H

Brands by name

Popular brands

Sharp MD-MT290H, Operation Manual

Search results

Summary of Contents for MD-MT290H

Reviews:

Related manuals for MD-MT290H

Brands by name

Popular brands