background image

English

   - 5 -

Safety Precautions

Read the following recommended safety 
precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240V 
AC, 50Hz outlet. Ensure that you select the correct 
voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the 
power cord (mains lead) or pinch the cord. Handle the 
power cord by the plug. Do not unplug the appliance 
by pulling from the power cord and never touch the 
power cord with wet hands as this could cause a short 
circuit or electric shock. Never make a knot in the cord 
or tie it with other cords. The power cords should be 
placed in such a way that they are not likely to be 
stepped on. A damaged power cord can cause 

fi

 re or 

give you an electric shock. When it is damaged and 
needs to be replaced, it should be done by quali

fi

 ed 

personnel.

Moisture and Water

Do not use this device in a humid and 
damp place (avoid the bathroom, the 
sink in the kitchen, and near the washing 
machine). Do not expose this device to 
rain or water, as this may be dangerous 
and do not place objects filled with 
liquids, such as 

fl

 ower vases, on top. 

Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug 
the TV and have it checked by quali

fi

 ed  personnel 

before operating it any further. 

Cleaning

Before cleaning, unplug the TV set 
from the wall outlet. Do not use liquid 
or aerosol cleaners. Use soft and dry 
cloth. 

Ventilation

The slots and openings on the TV set are intended for 
ventilation and to ensure reliable operation. To prevent 
overheating, these openings must not be blocked or 
covered in anyway.

Heat and Flames

The set should not be placed near to 
open 

fl

 ames and sources of intense heat 

such as an electric heater. Ensure that 
no open 

fl

 ame sources, such as lighted 

candles, are placed on top of the TV. Batteries should 
not be exposed to excessive heat such as sunshine, 

fi

 re or the like.

Lightning

In case of storm and lightning or when 
going on holiday, disconnect the power 
cord from the wall outlet. 

Replacement Parts

When replacement parts are required, make sure that 
the service technician has used replacement parts, 
which are speci

fi

 ed by the manufacturer or have the 

same speci

fi

 cations as the original one. Unauthorized 

substitutions may result in 

fi

 re, electrical shock or 

other hazards.  

Servicing

Please refer all servicing to quali

fi

 ed 

personnel. Do not remove the cover 
yourself as this may result in an electric 
shock.

Waste Disposal

Packaging and packaging aids are recyclable 

• 

and should principally be recycled. Packaging 
materials, such as a foil bag should be kept away 
from children 
Batteries, including those which are heavy metal 

• 

free, should not be disposed of with household 
waste. Please dispose of used batteries in an 
environmentally friendly manner. Find out about the 
legal regulations which apply in your area. 
Do not try to recharge batteries, there is a danger 

• 

of explosion. Replace batteries only with the same 
or equivalent type.

This symbol on the product or on its packaging means 
that your electrical and electronic device 
should be disposed at the end of its 
service life separately from your 
household wastes. There are separate 
collection systems for recycling in the EU. 
For more information, please contact the 
local authority or the dealer where you 
purchased the product.

Disconnecting the Device

The mains plug is used to disconnect the TV set 
from the mains and therefore it must remain readily 
operable.

Headphone Volume

Excessive sound pressure from earphones 
and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely 
attached to the wall in accordance with the installation 
instructions when mounted to the wall (if the option 
is available).

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10072502_50185682.indd   5

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10072502_50185682.indd   5

02.09.2011   15:56:53

02.09.2011   15:56:53

Summary of Contents for LC-40SH340K










































Reviews: