background image

English

   - 4 -

Important safety precautions

Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean 

• 

the product. Do not use liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical 

• 

cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry 

• 

tub, swimming pool and in a wet basement.
Do not place vases or any other water-

fi

 lled containers on this product. The water may spill onto the product 

• 

causing 

fi

 re or electric shock.

Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can 

• 

cause the product to fall, resulting in serious personal injuries as well as damage to the product. 
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold 
with the product. When mounting the product on a wall, be sure to follow the manufacturer’s 
instructions. Use only the mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden 

• 

stops, excessive force and uneven 

fl

 oor surface can cause the product to fall from the cart.

Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not 

• 

cover or block these vents and openings since insuf

fi

 cient ventilation can cause overheating 

and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other 
similar surface, since they can block ventilation openings. This product is not designed for 
built-in installation; do not place the product in an enclosed place such as a bookcase or rack, 
unless proper ventilation is provided or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the 

• 

product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured 
by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves 

• 

and other heat-generating products (including ampli

fi

 ers).

To prevent 

fi

 re, never place any type of candle or naked 

fl

 ames on the top or near the TV 

• 

set.
To prevent 

fi

 re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• 

Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at 

• 

high volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.

• 

There is power consumption always if main plug is connected.

• 

Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage 

• 

and other dangerous conditions. Request a quali

fi

 ed person to perform servicing.

The LCD panel is a very high technology product, giving you 

fi

 ne picture details.

Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a 

fi

 xed point of blue, green or red. This is within product speci

fi

 cations and does not constitute a fault.

Precautions when transporting the TV

When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two 
people holding it with two hands—one hand on each side of the TV.

WARNING

To prevent the spread of 

fi

 re, keep candles or other open 

fl

 ames away from this product 

at all times.

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10072502_50185682.indd   4

00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10072502_50185682.indd   4

02.09.2011   15:56:53

02.09.2011   15:56:53

Summary of Contents for LC-40SH340K










































Reviews: