background image

tV menu

Fine tune analogue channels

You can manually fine tune analogue channels when 
reception is poor�

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

analogue: 

manual installation

 > 

Fine tune

Press 

2� 

 to enter the 

Fine tune

 menu.

Press 

3� 

<

 or 

>

 to adjust the frequency.

Press 

4� 

 when done.

Select 

5� 

Store current channel

 to store the fine 

tuned channel under the current channel number.

Press 

6� 

 to enter.

Press 

7� 

oK

Done

 appears.

Press 

8� 

menu

 to exit.

rearrange channels

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

rearrange

.

Press 

2� 

 to enter the 

rearrange

 list.

Press 

3� 

<

 or 

>

 in the 

rearrange

 list to select the 

channel you want to rearrange.

Press the yellow button to move the channel 

4� 

up the list, or press the blue button to move the 
channel down the list.

Press 

5� 

menu

 to exit.

rename channels

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

rearrange

.

Press 

2� 

 to enter the 

rearrange

 list.

Press 

3� 

<

 or 

>

 in the 

rearrange

 list to select the 

channel you want to rename.

Press the red button. (

4� 

rename

)

Press 

5� 

 and 

 to select characters or 

<

 and 

>

 

to change the characters. Space, numbers (0-9) 
and other special characters are located between 

z

 and 

a

.

Press the green button or 

6� 

oK

 to finish.

note

Delete all characters by pressing the yellow button� Delete 

• 

only the highlighted character by pressing the blue button�

uninstall or reinstall channels

You can uninstall a stored channel or reinstall an 
uninstalled channel�

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

rearrange

.

Press 

2� 

 to enter the 

rearrange

 list.

Press 

3� 

<

 or 

>

 to select the channel you want to 

uninstall or reinstall.

Press the green button to uninstall or reinstall the 

4� 

channel.

Press 

5� 

menu

 to exit.

test digital reception

If using digital broadcasts, you can check the quality and 
signal strength of digital channels� This allows you to 
reposition and test your antenna or satellite dish�

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

Digital: 

test reception

.

Press 

2� 

oK

.

Press the green button to automatically start 

3� 

the test or manually enter the frequency of the 
channel you want to test. If the signal quality 
and strength is poor, reposition the antenna or 
satellite dish and retest.

When complete, press the yellow button to store 

4� 

the frequency.

Press the red button to return to the 

5� 

Channel 

installation

 menu.

Press 

6� 

menu

 to exit.

note 

If you have further problems with the reception of your 

• 

digital broadcast, contact a specialised installer�

Clear program list

You can erase the program list�

Press 

1� 

menu

 on the remote control and select 

installation

 > 

Channel installation

 > 

Clear 

program list

.

Press 

2� 

menu

 to exit.

 

24

Summary of Contents for LC-26SB25E

































Reviews: