41
Using memory card
Recording a motion picture
Use this setting to record images you are currently
watching.
Record with the settings made in “Rec. Mode” and
“Pre Record”.
Press
REC
to start recording.
• CARD indicator lights up red.
• Recording information displays in the lower
right corner of the screen.
1
2
Press
H
to stop recording.
To display the remaining record time.
Press
DISPLAY
while not recording.
• Remaining record time displays in the lower right corner
of the screen.
NOTE
• Do not press
POWER
on the display while recording.
Recording cannot finish properly and may damage the
file.
• Recording stops if you press
POWER
on the remote
control while recording.
• When card has no capacity for recording, “Card is full”
displays and stops recording.
• You cannot change the channel or switch the input source
while recording.
Displaying a motion picture
Press
CARD
and the card mode screen
displays.
1
2
Press
c
/
d
to select “Video”, and then press
ENTER
.
3
Press
a
/
b
/
c
/
d
to select the file you want
to play, and then press
ENTER
.
• Video playback starts.
4
Press
CARD
again to display the operation
panel.
• See page 36 for the operation panel
information.
• When viewing a motion picture, by pressing
VIEW MODE
the picture size changes.
Small – Medium – Large.
NOTE
The list of broadcasting type or input signal not available
for recording:
1
COMPONENT input
2
HDMI input
3
DVI-I input
4
Card picture
5
Copy guarded signal
6
V-chip blocked program
LC-26GA4U(E)-34-44
04.5.13, 3:07 PM
41
