Sharp LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV Operation Manual Download Page 10

Page: 10 / 88

Removing speakers

Preparation

NOTE

• Perform the same steps for right speaker.
• To attach the speakers, perform the steps in reverse order.

Unfasten the screw used to secure the speaker
bracket.

Unfasten the screws.

Take off the speaker terminal cover.

Disconnect the cable from the speaker.

CAUTION

• Do not remove the speakers from the TV unless using an optional bracket to mount it.

CAUTION

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

LC-26GA4U(E)-01-14

04.5.13, 2:58 PM

Summary of Contents for LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV

























































































Search results

Summary of Contents for LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV

Reviews:

Related manuals for LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV

Brands by name

Popular brands

Sharp LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV, Operation Manual

Search results

Summary of Contents for LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV

Reviews:

Related manuals for LC-26GA4U - AQUOS HDTV-Ready LCD Flat-Panel TV

Brands by name

Popular brands