Sharp HT-M700H, Operation Manual

Page: 18 / 72

05/10/4 HT-M700H(A)2.fm
15
TINSEA076SJZZ
HT-M700H
Prepar
ation for
Use
System connections (continued)
„
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and GND terminals.
Position the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
FM aerial
AM loop aerial
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
AM loop aerial
External AM aerial
15 m (49 feet)
7.5 m
(25 feet)
External
FM aerial
Earth wire
Earth rod