Sharp HR300F Operation Manual Download Page 38

Page: 38 / 109

Recording to DVD

Set a DVD-RW or DVD-R disc.

• When a new DVD-RW disc not

initialized yet is set, VR mode
initializing starts automatically. When
initializing is over, you can start
recording.

• When you want to re-initialize in Video

mode, select “DVD VIDEO MODE
INIT.” screen (page

• When you want to initialize in Video

mode from the beginning, select
“AUTO INITIALIZING” screen (page

Press

Number

buttons or

to select the channel to record.

Press

REC MODE

to select the

desired recording mode.

• The recording mode changes as

shown below each time the button is
pressed.

• Recording mode set when “MN

”

is selected is the recording mode set
on the “MANUAL REC. MODE”
screen (page

Press

●

REC

• Recording begins and REC icon is

displayed.

• The REC indicator (for DVD) on the

front of the Recorder is lit red during
recording.

Press

REC PAUSE

to pause

recording.

• Pause will not function during timer

recording.

• The REC indicator (for DVD) on the

front of the Recorder blinks during
Recording Pause mode.

Press

REC PAUSE

to resume

recording.

Press

REC STOP

to stop

recording.

• “DATA IS BEING RECORDED TO

DISC.” displays on TV screen and
recording stops.

• Stop recording first when you take out

the disc.

NOTE

• Data is still written to the disc after recording

is stopped, and so you may be unable to
start the next recording immediately.

• Press

ON SCREEN

(under the cover) to

confirm remaining time of DVD or check
the counter display during recording.

• You cannot record programmes which

prohibit recording.

• Recording either stops or pauses automati-

cally in the following cases.
—Programme which prohibits recording is

on air.

—Unable to continue recording for some

reason.

• Timer recording cannot be performed

during direct recording. To perform timer
recording, stop direct recording before the
preset time for timer recording.

You may not be able to record on disc
edited by other recorder.

• If a disc edited by other DVD recorder has

more than 999 chapter marks, it cannot be
edited (or recorded) with this Recorder.

• If a disc edited by other DVD recorder has

added or erased scenes 51 times or more
per title or the disc is protected, it cannot
be edited (or recorded) with this Recorder.

About Recording to DVD in Video Mode

• In case you are recording to DVD in Video

mode and recording stops due to power
failure etc., recorded contents a few
minutes before the stop may not be
recorded.

• For details on limitation during recording in

Video mode, see page

too.

Inserting Chapter Marks
Manually during Recording

Press

CHAPTER MARK

(under the cover).

• “RECORDED CHAPTER MARK.” displays

and chapter mark is recorded.

• You can only record chapter marks

manually when recording to DVD-RW (VR
mode).

• You cannot record chapter marks manually

when recording to DVD-RW (Video mode)
or DVD-R, or during Simultaneous Record-
ing/Playback.

Setting Record End Time
during Direct Recording

• You can set record end time during direct

recording to DVD. For details see “Setting
the Record End Time during Direct
Recording (Simple Recording Timer)” on
page

0 0 : 0 0 : 0 1

1 / 1
1 / 1

F I NE

DVD-RW

I N AL

I G

REMAIN 1h0m

REC

FINE

DV-HR350F-031-036

04.3.1, 4:22 PM

All manuals and user guides at all-guides.com

Summary of Contents for HR300F














































































































Search results

Summary of Contents for HR300F

Reviews:

Related manuals for HR300F

Brands by name

Popular brands

Sharp HR300F, Operation Manual

Search results

Summary of Contents for HR300F

Reviews:

Related manuals for HR300F

Brands by name

Popular brands