Sharp HR300F Operation Manual Download Page 103

Page: 103 / 109

101

On-screen Error Messages

RECORDING WAS STOPPED DUE TO
FULL DISC.

REPAIRING THE DISC.

THIS IS A NON-STANDARD DISC.
REMOVE IT.

THIS VIDEO CANNOT BE RECORDED
TO THIS DISC.
TIMER RECORDING COULD NOT
START.

LIVE BROADCAST RECORDING
PROHIBITED.
RECORDING STOPPED.

THIS VIDEO IS COPY PROTECTED.
RECORDING IS NOT POSSIBLE.

CANNOT OPERATE DUE TO HDD
ERROR.
CAN VIEW LIVE BROADCASTS ONLY.
CONTACT THE NEAREST SERVICE
CENTRE APPROVED BY SHARP.

SYSTEM ERROR.
POWER IS OFF.

CHECKING HARD DISC.
CAN ONLY VIEW LIVE BROADCAST
UNTIL CONFIRMATION IS OVER.

THIS PROGRAM COPY IS PRO-
TECTED.
CANNOT VIEW TIME SHIFT.

• Occurs when empty space in the

disc runs out.

• Occurs when recording stops

before disc information has been
correctly written onto a DVD, due to
a problem like a power failure.

• Occurs if the loaded disc cannot be

recorded to or played because it is
a non-standard or scratched, etc.

• Occurs if you try to record “Copy

Once” video onto DVD-R or non-
CPRM compatible DVD-RW.

• Occurs if a programme begins

during recording, and recording of
the broadcast itself is forbidden due
to copyright protection.

• Occurs if you attempt to record a

programme, and recording of the
broadcast itself is forbidden due to
copyright protection.

• Occurs when there is a problem

with the HDD, and when you
perform an operation which
requires HDD operation, like special
playback or recording.

• If a problem occurs with the HDD

while power is “ON”, power is shut
off automatically.

• Occurs if there is a power failure, or

the power cord is unplugged and
plugged in again while power is
“ON”.

• Occurs if time shift viewing is

impossible because recording of
the broadcast itself is forbidden by
copyright protection.

• Wait until DVD disc recovery is

finished.

• Remove the disc.

• Record on CPRM compatible DVD-

RW disc in VR mode.

• Initialize the HDD once. If initializa-

tion does not solve the problem,
please contact the nearest service
centre approved by Sharp as soon
as possible.

• It may take 1-2 minutes to check the

HDD. During this time, you can only
watch live broadcasts. Wait a while
until the check is over.

• You can only view live broadcasts.

Error message

Possible Error

Suggested Solution

Messages during Special Playback

CANNOT OPERATE DUE TO THE
CONDITION OF HARD DISC.

HARD DISC IS NOT READY YET.
CANNOT OPERATE.

• Occurs if you perform operation like

special playback when there is
problem with the HDD.

• Occurs if you perform operation

requiring operation of the HDD (like
special playback or recording)
during HDD preparation.

• The HDD must be repaired, so

contact the nearest service centre
approved by Sharp as soon as
possible.

• You can only view live broadcasts

until preparation is finished. Wait a
while until operation is enabled. (If
you use the Recorder at a cold
location and the HDD temperature
is low, HDD preparation may take
some time.)

Error message

Possible Error

Suggested Solution

CANNOT SELECT MORE.

• Occurs if you attempt to select 6

titles (chapters) at the screen for
selecting titles or chapters to be
dubbed.

• Dub 5 titles (or chapters) at a time.

Error message

Possible Error

Suggested Solution

Messages during Dubbing

DV-HR350F-097-106

04.3.1, 4:28 PM

101

All manuals and user guides at all-guides.com

Summary of Contents for HR300F














































































































Search results

Summary of Contents for HR300F

Reviews:

Related manuals for HR300F

Brands by name

Popular brands

Sharp HR300F, Operation Manual

Search results

Summary of Contents for HR300F

Reviews:

Related manuals for HR300F

Brands by name

Popular brands