Sharp GX10, User Manual

Page: 99 / 142

99 Settings
Security (M 7-6)
Enabling/Disabling the PIN Code (M 7-6-1)
If the PIN code is enabled you will be asked in enter the
PIN code each time the phone is switched on. Your PIN
code is stored on the SIM and you should have been
made aware of the code when you purchased the SIM.
Contact your service provider for further details.
1.
Press to display the Main Menu.
2.
Press or to select “Settings”, then press .
3.
Press or to select “Security”, then press .
4.
Select “PIN Entry”, then press .
5.
Press or to select “On” or “Off”, then press
.
6.
Enter your PIN code, then press .
Note
• If you enter the wrong PIN code three times in step 6,
the SIM will lock. To remove the lock, contact your
service provider/SIM vendor.
Changing PIN Code
This allows you to change the PIN code stored on the
SIM.
1.
Perform steps 1 to 3 in “Enabling/Disabling the PIN
code”.
2.
Press or to select “PIN Entry”, then press
.
3.
Press or to select “Change PIN”, then press
.
4.
Enter the existing PIN code, then press .
5.
Enter a new PIN code, then press .
6.
Enter a new PIN code again, then press .
If you enter a code different from the code which
you entered in step 6, the screen returns to step 5.
Enter the correct code again.
Handset Lock (M 7-6-2)
The Handset Lock is an additional security feature
which prevents unauthorised use of the phone or certain
features. The default Handset Lock code is “0000”.
1.
Perform steps 1 to 3 in “Enabling/Disabling the PIN
code”.
2.
Press or to select “Handset Lock”, then
press .