Sharp GX10, User Manual

Page: 80 / 142

Call Manager 80
Checking the Charge Rate
1.
Select “Read Units”, then press at step 3 in
“Setting the Charge Rate” on page 79.
The charge rate is now displayed.
2.
When you have finished, press [Back].
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1.
Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 79.
2.
Press or to select “Max Cost”, then press
.
3.
Press or to select “Set Limit”, then press
.
4.
Enter your PIN2 code, then press .
5.
Enter a value, then press .
To enter a decimal point, press .
Checking the Charge Limit
1.
Select “Read Limit”, then press at step 3 in
“Setting the Charge Limit”.
The value of the charge limit is now displayed.
2.
When you have finished, press [Back].
Resetting All Call Timers and Call Costs
1.
Press to display the Main Menu.
2.
Press or to select “Call Manager”, then press
.
3.
Press or to select “Call Register”, then press
.
4.
Press or to select “Call Timers” or “Call
Costs”, then press .
5.
Press or to select “Clear Timers” or “Clear
Costs”, then press .
6.
Press or to select “Yes”, then press .
To cancel resetting, select “No”, then press .
7.
Enter your PIN2 code, then press .
The Call Timers and Costs are reset to zero.
Checking the Residual Credit
1.
Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 79.
2.
Press or to select “Residual Credit”, then
press .
3.
When you have finished, press [Back].