E-9
ENGLISH
REMOTE CONTROLLER OPERATION
MODE button
Press to set operation
mode.
ON/OFF button
Press to start or stop
operation.
TEMP. button
Press to set suitable
TEMP.
FAN button
Press to set fan speed.
Loading Batteries
• After batteries are installed, the display
shall display icons and letter codes of
all functions.
• The life of batteries is about year.
• Do not mix new and old batteries or mix
different types of batteries in usage
• If the remote controller shall not be
used for a long time, take out the
batteries to avoid liquid leakage and
any subsequent failure.
• Load two “R03(AAA)” batteries.
(Accessories)
ACL
Precautions:
• Point the remote controller towards the receiver window on the wire controller and press the
desired button.
• Ensure there is no obstacle between the remote controller and the receiver window of the
wire controller.
• The remote control can send signals from up to 8 metres away.
• Never drop or throw at will the remote controller.
• Never let any liquid enter the remote controller. Avoid direct sunshine over the remote
controller. Do not place the remote controller in an extremely hot place.
• SWING button is invalid for this unit.
Receiver window
GREE_duct_eng_1022.indd 9
08.10.27 3:32:07 PM
