background image

3

• Adjust or reposition the receiving antenna.

• Increase the distance between the main unit and the radio or TV.

• Connect the equipment into an outlet on a circuit different from that of the radio or 

TV receiver.

• Consult the dealer or a qualified radio or TV technician. 

CAUTIONS CONCERNING OPERATION

• Do not block the air inlet or air outlet.

• Do not place the main unit near or on hot objects, such as stoves or heaters, or 

where it may come into contact with steam.

• Always operate the main unit in an upright position.

• Do not move the main unit when it is in operation.

• When moving the main unit, use the handle on the back of the main unit.

• If the main unit is on easily damaged flooring, an uneven surface, or thick-piled 

carpet, lift it up when moving.

• Do not operate the main unit without the filters properly installed.

• Do not wash and reuse the HEPA filter and the Deodorizing filter. 

Doing so will not improve filter performance and can also cause electric shock or 

operating malfunctions.

• Clean the exterior with a soft cloth only. Do not use volatile fluids or detergents. 

The main unit surface may be damaged or cracked with Benzine, paint thinner or 

polishing powder. 

• Do not scrub the Back Panel hard during its maintenance. 

INSTALLATION GUIDELINES 

• Avoid locations where furniture, fabrics, or other objects can come in contact with 

the main unit and interfere with the intake and outtake of air.

• Avoid locations where the main unit is exposed to condensation or drastic changes 

in temperature. Appropriate room temperature is between 0 – 35 ºC.

• Place the main unit on a level and stable surface with sufficient air circulation.  

When placed on heavy carpet, the main unit may vibrate slightly. 

• Avoid locations that generate grease or oily smoke.  

Doing so can cause the main unit exterior to crack.

• The dust collecting ability of the main unit is effective even when the main unit is 

as close to 3 cm from the wall,the surrounding walls and floor may get dirty. Please 

place the main unit at a distance from the wall.  

The wall directly behind the air outlet may become dirty over time. When using the 

main unit for an extended period of time at the same location, periodically clean 

the walls adjacent to it. 

FILTER GUIDELINES

 

• Follow the instructions in this manual for proper filter care and maintenance.  

(Page 4)

FP-J30J_2nd.indd   3

FP-J30J_2nd.indd   3

2022/04/22   10:57:51

2022/04/22   10:57:51

Summary of Contents for FP-J30J

















Reviews: