10
Before calling for repair, please review the list below, since the problem may not be a main unit
malfunction.
TROUBLESHOOTING
SYMPTOM
REMEDY (not a malfunction)
Dust and smoke are not removed.
• Clean or replace the filter if they appear to be heavily
soiled. (Refer to Page 4, 5)
• Check if the plastic bag is removed from the filter.
(Refer to Page 7)
A clicking or ticking sound is heard
from the main unit.
• Clicking or ticking sound may be audible when the main
unit is generating ions. (Refer to Page 9)
The discharged air has an odor.
• Check to see if the filter are heavily soiled.
Replace the filter.
Smell from a new unit and/or filter.
• Immediately after removing the plastic bag, a slight odor
may occur.
This odor is not harmful for filter performance or human
exposure.
The Plasmacluster Ion Indicator
doesn’t Light on.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press
for 3 seconds to light On.
• Check to see if the Light Control OFF is selected.
Press
for 3 seconds to light On.
AUTO RESTART
• Even when the plug is unplugged or the breaker is
thrown during operation, the main unit resumes at the
previous operation mode and settings if the power re-
covers.
ON (default)
OFF
(with the main unit OFF)
(with the main unit OFF)
If the
,
,
lights Lights up for
10 seconds, the setting is ‘ON’.
(simultaneously for more than 3 sec.)
(simultaneously for more than 3 sec.)
If the
,
,
lights flashes for
3 seconds, the setting is ‘OFF’.
FP-J30J_2nd.indd 10
FP-J30J_2nd.indd 10
2022/04/22 10:58:33
2022/04/22 10:58:33
