1 – 9
FO-780A
[5] Quick reference guide
INSTALLATION
1. Connect the handset as shown.
2. Plug the power cord into a grounded, 230-240 V outlet.
3. Plug one end of the telephone line into the TEL. LINE socket on the rear of the
fax and the other end into the adapter. Plug the adapter into a telephone wall
socket.
CONNECTING AN ANSWERING MACHINE AND/OR EXTENSION TELEPHONE
SETTING THE DATE AND TIME
Note: Imaging film and paper must be loaded to perform the following operation.
Press:
Display shows: DATE & TIME SET
Press the START/MEMORY key:
Enter two digits for the Day (01 through 31).
Enter two digits for the Month (01 through 12).
Enter four digits for the Year (Ex: 1999).
Enter two digits for the Hour (01 through 23).
Enter two digits for the Minute (00 through 59).
When finished, press:
STORING AND CLEARING NUMBERS FOR AUTOMATIC DIALING
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
Display shows: FAX/TEL # MODE
2. Press 1 to store a number or 2 to clear a number.
3. Enter a 2-digit Speed Dial number (from 01 to 08 for Rapid Key Dialing, or 09
to 88 for Speed Dialing). (If you are clearing a number, go to Step 7.)
4. Enter the full telephone/fax number.
5. Press:
6. Enter the name of the location by pressing number keys (max. of 20 charac-
ters). (Refer to the letter entry table in ENTERING YOUR NAME AND
NUMBER.)
7. Press:
SENDING DOCUMENTS
Place your document (up to 10 pages)
face down in the document feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press their Start
key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission will begin automatically.
Speed Dialing
1. Press:
2. Enter 2-digit Speed Dial number.
3. Press:
RECEIVING DOCUMENTS
Press:
FAX mode: The fax automatically answers on four rings and receives the incoming
document.
TEL mode:
TEL/FAX mode: The fax machine automatically answers on two rings and receives
faxes. Voice calls (including manually dialed fax transmissions) are signalled by a
special ringing sound.
A.M. mode: Select this mode when an answering machine is connected to the fax
and the answering machine is turned on.
1. Remove the seal covering the TEL. SET socket on the rear of the fax. Connect
an extension telephone or answering machine to the TEL. SET socket.
2. If desired, connect an extension phone to the answering machine.
ENTERING YOUR NAME AND NUMBER
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
FUNCTION
3
Display shows: OWN NUMBER SET
2. Press:
3. Enter your fax number (max. of 20 digits) by pressing the number keys.
♦
If you make a mistake, press the HOLD/SEARCH key to move the cursor
back to the mistake, then enter the correct number or letter.
4. Press:
5. Enter your name by pressing the appropriate number keys as shown below.
♦
To enter two letters in succession that require the same key, press the SPEAKER
key after entering the first letter.
6. When finished, press:
START/MEMORY
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
START/MEMORY
STOP
FUNCTION
3
SPEAKER
SPEED DIAL
START/MEMORY
START/MEMORY
START/MEMORY
STOP
START/MEMORY
START/MEMORY
STOP
START/MEMORY
START/MEMORY
TEL.
SET
TEL.
LINE
1
2
3
TEL.
SET
TEL.
LINE
FUNCTION
3
FAX
TEL
A.M.
14 FEB 10:30
TEL/FAX
FAX
TEL
A.M.
14 FEB 10:30
TEL/FAX
FAX
TEL
A.M.
14 FEB 10:30
TEL/FAX
FAX
TEL
14 FEB 10:30
A.M.
TEL/FAX
RECEPTION
MODE
Fax
tone
RECEIVING
START/MEMORY
SPEED
DIAL
REDIAL
HOLD/
SEARCH
SPEAKER
ABC
DEF
JKL
MNO
GHI
TUV
WXYZ
PQRS
Deletes high-
lighted letter
Upper/lower
case shift key
Moves cursor
to the left
Moves cursor
to the right
Press either key one or more times to select
and enter a symbol.
Summary of Contents for FO-780A
