Sharp FO-50 Operation Manual Download Page 7

Page: 7 / 103

• Never insert objects of any kind into slots or openings on the

machine. This could create a risk of fire or electric shock. If an
object falls into the machine that you cannot remove, unplug the
machine and consult a qualified service representative.

• Do not place this machine on an unstable cart, stand or table. The

machine could be seriously damaged if it falls.

• Never install telephone wiring during a lightning storm.

• Never install telephone sockets in wet locations unless the socket is

specifically designed for wet locations.

• Never touch bare telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Avoid using a telephone (other than a cordless type) during an elec-

trical storm. There may be a remote risk of electric shock from
lightning.

• Do not use a telephone to report a gas leak in the vicinity of the

leak.

• The socket-outlet must be installed near the equipment and must be

easily accessible.

WARNING NOTICE:

NO calls can be made to or from this fax

during a mains power failure.

WARNING:

Australian Communications Authority (ACA)

regulations state that no unauthorised changes or modifications to this
equipment are permitted.

Note:

Complies with ACA and NZ TELECOM standard AS/

NZS3548 regarding emission of electromagnetic interference.

all-Fo50A.book Page 6 Friday, October 1, 1999 5:32 PM

Summary of Contents for FO-50








































































































Search results

Summary of Contents for FO-50

Reviews:

Related manuals for FO-50

Brands by name

Popular brands

Sharp FO-50, Operation Manual

Search results

Summary of Contents for FO-50

Reviews:

Related manuals for FO-50

Brands by name

Popular brands