Sharp FO 4400 - B/W Laser - All-in-One Operation Manual Download

Page: 23 / 144

Loading Printing Paper

1. Installation

Remove the received document tray.

Insert a stack of paper into the tray,
print side up.

•

Important!

The stack of paper must not

be higher than the red line on the paper
tray.

Squeeze the paper guide and move it

to match the length of the paper you
are loading.

Loading Printing Paper

You can load up to 250 sheets of letter or legal paper (max. 20 lbs.) in the
paper tray.

♦

A paper cassette is available as an option. Up to 500 sheets of letter or
legal paper can be loaded in the paper cassette.To have the cassette
installed, consult your dealer.

Important:

Do not use the back side of paper that has already been printed

on.

Note:

If you need to add paper to the tray or cassette while paper still

remains, remove the remaining paper and combine it into a single stack with
the new paper.

Loading paper in the paper tray

Attach a letter or legal label
here to indicate the paper size

Red line

all.book Page 21 Monday, January 19, 2004 1:02 PM

Summary of Contents for FO 4400 - B/W Laser - All-in-One

















































































































































Search results

Summary of Contents for FO 4400 - B/W Laser - All-in-One

Reviews:

Related manuals for FO 4400 - B/W Laser - All-in-One

Brands by name

Popular brands

Sharp FO 4400 - B/W Laser - All-in-One, Operation Manual

Search results

Summary of Contents for FO 4400 - B/W Laser - All-in-One

Reviews:

Related manuals for FO 4400 - B/W Laser - All-in-One

Brands by name

Popular brands