manualshive.com logo in svg

Sharp FO 4400 - B/W Laser - All-in-One, Operation Manual, Page: 20 / 144

Share
Download
Sharp FO 4400 - B/W Laser - All-in-One Operation Manual Download Page 20

Installing the Print Cartridges

18

3

If you are replacing the drum cartridge, 

remove the old cartridge and dispose 
of it according to local regulations.

4

Remove the new drum cartridge from 
its packaging. Insert the drum 
cartridge into the print compartment.

•

Caution!

 Excessive exposure to light 

will damage the drum cartridge. Install 
the cartridge promptly after removing it 
from its packaging.

•

Make sure the drum cartridge is 
inserted in as far as it will go.

5

If you are installing a new toner 
cartridge, remove the new toner 
cartridge from its packaging. Remove 
the tape from the cartridge and then 
open the cartridge handle so that it 
stands straight up.

6

Shake as indicated by the arrows to 
distribute the toner evenly within the 
cartridge.

•

If the toner is still lumpy after shaking, 
the gears in the cartridge may make a 
noticeable sound when the print 
compartment cover is closed after 
installing the cartridge. This is normal 
and does not indicate a problem.

GREEN

BLUE

all.book  Page 18  Monday, January 19, 2004  1:02 PM

Summary of Contents for FO 4400 - B/W Laser - All-in-One

















































































































































Reviews:

No comments