Sharp FO-2950M - B/W Laser - All-in-One, User Manual

Page: 91 / 220

Loading Printing Paper
87
1. Ins
tall
a
tion
6
Push the paper release lever back
down.
•
Note:
If the paper does not feed
correctly, remove the entire stack
from the tray and repeat the loading
procedure from the beginning.
Important:
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
4
Insert the stack of paper firmly into
the tray,
print side up
.
•
Make sure that the stack is not
higher than the marked line.
Loading too much paper may cause
paper jams and misfeeds.
•
If paper remains in the tray, take it
out and combine it into a single
stack with the new paper before
adding the new paper.
5
Make sure the stack of paper is
aligned against the right paper guide,
and then gently move the left paper
guide to the
A4
position.
all-fo2950se.book Page 87 Tuesday, November 21, 2000 3:27 PM