Sharp FO-2950M - B/W Laser - All-in-One, User Manual

Page: 66 / 220

Quick Reference Guide
62
Loading Paper in the Paper
Tray
You can load up to 200 sheets of A4
paper (max. 80 g/m2) in the paper tray.
Caution!
Do not use the blank side of paper that
has already been printed on.
1. Pull out the paper tray extension.
2. Fan the paper, and then tap the edge
against a flat surface to even the stack.
3. Pull the paper release lever toward you.
4. Insert the stack of paper firmly into the
tray, print side up.
•
Make sure that the stack is not higher
than the marked line. Loading too much
paper may cause paper jams and
misfeeds.
•
If paper remains in the tray, take it out and
combine it into a single stack with the
new paper before adding the new paper.
5. Make sure the stack of paper is aligned
against the right paper guide, and then
gently move the left paper guide to the
A4
position.
6. Push the paper release lever back down.
Note: If the paper does not feed correctly,
remove the entire stack from the tray and
repeat the loading procedure from the
beginning.
all-fo2950se.book Page 62 Tuesday, November 21, 2000 3:27 PM