Sharp FO-2950M - B/W Laser - All-in-One User Manual Download Page 194

Page: 194 / 220

Maintenance

190

Grasp the finger hold on the toner
cartridge handle where it is marked

PUSH

, and pull the handle out.

Rehold the handle and pull the toner
cartridge out of the compartment.

•

Place the toner cartridge on a sheet
of paper on a level surface.

Grasp the tabs on the drum cartridge
handle and gently pull the cartridge
out of the machine.

Remove the new drum cartridge from
its packaging.

all-fo2950se.book Page 190 Tuesday, November 21, 2000 3:27 PM

Summary of Contents for FO-2950M - B/W Laser - All-in-One





























































































































































































































Search results

Summary of Contents for FO-2950M - B/W Laser - All-in-One

Reviews:

Related manuals for FO-2950M - B/W Laser - All-in-One

Brands by name

Popular brands

Sharp FO-2950M - B/W Laser - All-in-One, User Manual

Search results

Summary of Contents for FO-2950M - B/W Laser - All-in-One

Reviews:

Related manuals for FO-2950M - B/W Laser - All-in-One

Brands by name

Popular brands