<P=003>
Note:
All telephone lines accept pulse dialling but only modern types of
exchange systems accept tone. To check your line type lift the receiver
as if to make a telephone call and attempt dialling in the tone dial
mode. If after dialling a digit you find that the dial tone has been
removed from the line, you are on a tone dial line. If not, you are on a
pulse dial line. Repeat the above in the pulse dial mode to confirm.
Setting 9:
PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when the reception mode is set to
TEL/FAX. Enter a number from "
1
" to "
4
" as follows:
"
1
" (15 SEC.):
15 seconds
"
2
" (30 SEC.):
30 seconds
"
3
" (60 SEC.):
60 seconds
"
4
" (120 SEC.):
120 seconds
Ireland:
Settings "
3
" and "
4
" are not available.
•
Initial setting: "
1
"
Setting 10
: QUIET DETECT TIME
This sets the duration of silence (in seconds) after which the fax will take over
the line and begin reception when an answering machine is connected. Enter a
number from "
01
" to "
10
", or enter "
00
" to turn off the function. (See Chapter
7 for more details.)
•
Initial setting: "
04
"
Setting 11:
QUIET DETECT START TIMING
This setting can be used to delay the start of the Quiet Detect Time function
used for an answering machine connection. Enter a 2-digit number equal to the
desired number of seconds of the delay ("01" to "15"), or enter "00" for no
delay. (See Chapter 7 for more details.)
•
Initial setting: "
00
"
Chapter
9
Optional
Settings
75
Summary of Contents for FO-1660M
Page 108: ......
