manualshive.com logo in svg

Sharp EL-9450, Operation Manual

Share
Download
Sharp EL-9450 Operation Manual Download Page 90

83

Chapter 4: Graphing Features

2. Press 

T

.

Blank table will appear.

3. Press 2 

E

 

_

 3 

E

 to

enter X values.

* An automatically created table in the User mode cannot be

scrolled vertically.

Note:

While the table is in the User mode, a selected row can be
deleted by pressing 

D

.

7.  Other Convenient Graphing Features

The calculator is equipped with rapid graphing features that make graph equation
entry and window and zoom settings easy. Press 

f

 to enter the rapid feature

mode and you can easily enter an equation or set the settings by using the pre-
installed equations or settings.

1. Rapid GRAPH

You can select a desired equation from the pre-installed list of equations to draw a
graph.

• This feature is valid only in the rectangular coordinate system.

If you press 

f

 in the other coordinate systems, an error will occur. The message

“Rect-coordinate only available” will appear.

• 8 kinds and 50 types of equations listed below are pre-installed in the Rapid GRAPH

feature.

Summary of Contents for EL-9450









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands