manualshive.com logo in svg

Sharp EL-9450, Operation Manual

Share
Download
Sharp EL-9450 Operation Manual Download Page 107

100

Chapter 6: SHIFT/CHANGE Features

3. Press 

{

.

The graph “Y = X

2

” is shifted by 1 (Y

= 1) upward.

The cursor icon will change to “   ”

indicating that the graph will be
shifted upward from the start point (0, 0) in the next step.

The 

∆

X and 

∆

Y values at the bottom of the graph indicates the

amount of shift amount in the X and Y directions.

4. Press 

E

.

The line type of the original graph
(Y = X

2

) is changed to the dotted

line (....) and the shifted graph is
drawn in the solid line (—).

The upper right portion of the screen shows how the equation
is changed according to the graph shift. In this case, it says “Y
= X

2

” is changed to “Y = X

2

 

+

 1”.

The cursor position is also shifted in the same direction and
the cursor icon will be changed to the four arrow type, indicat-
ing that shift feature is now in the standby mode.

The equation of the graph before shift (Solid line graph)

The directions the
graph can be shifted
(When all the four
arrows are shown, the
graph can be shifted
for four directions.)

Registered equation
(The first equation, “Y = X

2

”, is

automatically registered.)

Summary of Contents for EL-9450









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands