manualshive.com logo in svg

Sharp EL-9450, Operation Manual

Share
Download
Sharp EL-9450 Operation Manual Download Page 163

156

Chapter 10: OPTION Menu

1. Connect the calcula-

tors securely using

the optional CE-450L

communication cable.

• Make sure the commu-

nication cable is firmly inserted into the ports of both calculators.

* Use the CE-450L only for linking two EL-9450’s.

The EL-9450 can only be linked to another EL-9450.

2. Press 

@

 

p

 

D

 on both calculators.

3. Press 

2

 

on the receiving

machine.

The receive mode screen will

appear on the display.

4. Press 

1

 on the sending

machine.

5. The send menu will appear on the display. Specify the data to

send from the following categories.

3. Press 

E

.

L3

 will disappear and the 

L3

 line will

become empty.

• Press 

@

 

q

 to cancel the

delete option.

• Above procedures and displays are only an example. Displayed

items may vary according to data input and use.

* Press 

@

 

p

 

C

 

8

 to delete the memories

previously entered.

4. Linking to another EL-9450 or PC

Using the optional CE-450L or CE-LK1P, the EL-9450 can be linked to another EL-

9450 or PC, respectively.

To transfer data, press 

@

 

p

 

D

 to open the Link option window. Press

1

 to send data and press 

2

 to receive data.

Transmission

between EL-

9450’s

Summary of Contents for EL-9450









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands